What is the Ender 3 V3 build volume?

The nominal build volume is 220 × 220 × 250 mm. The plate is square in X/Y, but the Z height is 250 mm.

Is the Ender 3 V3 the same as the V3 KE or Neo?

No. The variants have different motion systems and sometimes different build volumes. Use the page for your exact model and verify the slicer profile.

Can the Ender 3 V3 print a 250 mm cube?

No. The X and Y axes are 220 mm, so a 250 mm cube cannot fit at 100% even though the Z axis is 250 mm.

Can the Ender 3 V3 print ABS?

It is an open-frame printer, so ABS/ASA need an enclosure and controlled cooling. PLA and PETG are much easier; large ABS parts are likely to warp.

Can the Ender 3 V3 print PETG?

Yes, with a dry spool and a suitable bed surface. Keep the 220 mm plate in mind: a brim for PETG can reduce the usable XY area.

Printers/FDM

Creality Ender 3 V3 build volume and fit check

The Ender 3 V3 has a 220 × 220 × 250 mm build volume. It is a bed-slinger, so the plate moves in Y and the frame is open. The V3, KE, Neo, Plus and Mega are different machines with different volumes; this page is specifically for the 220 × 220 × 250 mm V3.

220 × 220 × 250 mmFDMNo upload

Build volume

220 × 220 × 250mm

Process: FDM
Specs verified: 2026-11-01

Build volume & fit check

Check a model against this build volume

Nominal build volume. Usable area can be smaller with purge lines, brims, or the exact slicer profile.

Build volume & fit check

No upload

Creality Ender 3 V3

220 × 220 × 250 mm · FDM

Build volume

220 × 220 × 250 mm

Process

FDM

XY clearance per side (mm)

0 mm

Model units

Millimetres

Drop a model to check the bed

STL, OBJ, PLY, 3MF, GLB, glTF, or a .gltf with all of its .bin companions. Files are read locally.

Model units · XY clearance per side (mm)

Nominal build volume. Usable area can be smaller with purge lines, brims, or the exact slicer profile.

Drop a model to check the bed

STL, OBJ, PLY, 3MF, GLB, glTF, or a .gltf with all of its .bin companions. Files are read locally.

Choose a file

Max file size: 500 MB · No upload

Model unitsXY clearance per side (mm)

Removed from the usable bed width and depth; the Z height is not reduced.

No upload · Worker

Printer specifications

Build volume: 220 × 220 × 250 mm
Process: FDM
Height: 250 mm
Model variants: Ender-3 V3
Source: creality.com

Nominal build volume. Usable area can be smaller with purge lines, brims, or the exact slicer profile.

Model-specific limits

Do not use this page for an Ender 3 KE, Neo, Plus or Mega without confirming its own build volume; those variants are not identical.
The open frame and moving bed make large ABS parts prone to warp and layer separation. PLA and PETG are the safer starting point.
A 220 mm plate leaves little margin for a skirt or brim. Add clearance when the model touches the edge.

What fits

Budget functional parts

Brackets, spacers, jigs and replacement parts for household repairs are a good fit within 220 × 220 mm.

PLA and PETG prototypes

The 250 mm Z height supports tall prototypes; check stability and consider splitting very tall, narrow parts.

Upgrade and printer parts

The Ender platform is often used for its own upgrades. Check each printed mod against the 220 × 220 × 250 mm envelope.

Orientation tips

Rotate long parts to use the 250 mm Z axis only when the print can tolerate the new orientation and supports.
Use a brim for tall PLA parts and add its width to the XY clearance.
If the model is only slightly over 220 mm in X or Y, a 90-degree rotation may solve the footprint before scaling.

Questions

References

https://www.creality.com/support/creality-ender-3-v3

Specs verified: 2026-11-01

Independent compatibility tool. Not affiliated with the printer manufacturer; verify the exact printer profile in your slicer before printing.